WHY2025 wiki - User contributions [en]

Badge

2025-08-06T12:02:44Z

Rick:

<div class="col-wrap-col-50">
{{whybox|title=WHY2025 Badge|content=
* [https://why2025.org/post/494 Blogpost 01]
* [https://why2025.org/post/697 Blogpost 02]
* [https://www.youtube.com/watch?v=-uMUSUYVGkU WHYCast Episode41]
* [https://tweakers.net/geek/237414/dit-is-de-why2025-badge-met-twee-esp32s-en-een-loramodule.html Tweakers article]
* [https://gitlab.com/why2025/team-badge Team:Badge GitLab repo] (files + documentation)
* [https://badge.why2025.org/ BadgeHub]
* WHY2025 Badge comes with two 18650 round battery cells, you don't need to buy cells before the event.
* ⚠️ [[Badge/Fire hazard]]
}}
</div>
<br>

Yes, we have a dedicated '''WHY2025 Badge Updates''' Signal group.

-> Feel free to share this new - '''WHY2025 Badge Updates''' - Signal group link with everyone at WHY2025.

https://signal.group/#CjQKINdiQ_2mg4ZIZ9AbjD5UHq8gnIgRojSTnOb6lbx-Tvh_EhDHBzcPicIer3NabcN0fuR9

yes, we're expecting this to become a big one :)

Thank you.

== We could use your help. ==

We need your support for printing the 3mm Full-frame Spacer.

If you want to help out then join the Signal group.

[https://signal.group/#CjQKIBzawhrMtrLuA-5d-J9omT2VW5gqnvtaXRbojytjGzoeEhAzItv1WoFWVkqlxx3GTaZc 3D printed spacer - Signal group]

Do you have a 3D printer and want to help print badge cases or spacers? Great.

=== 3mm Full-frame Spacers ===

We still need many more of these 3mm Full-frame spacers, any contributions are much appreciated.

Get the STL from [https://gitlab.com/why2025/team-badge/Hardware/-/blob/main/Spacer/3d_print/Full_Spacer_with_LoRa_Antenna_WHY2025.stl?ref_type=heads our Gitlab].

A few notes on printing:
* Most prints will be in PLA, so use that if possible.
* Avoid stack prints or anything that might create uneven surfaces on the prints.
* Color doesn't matter - use whatever you'd like.

* There are two options for the spacer thickness endresult:
* Option 1. A spacer thickness of 3mm everywhere. This is great.
* Option 2. A spacer thickness of 3mm in the top part. That is the display area.
* and 2.9 mm in the lower part. That is the keyboard area.

* There will be some 3D printers available at camp, so printing will continue during the event, but the more units we can make before then, the better.

== 3mm Full-frame Spacer Status ==

=== Current Contributors ===
{| class="wikitable"
|+ Full-frame Spacer Contributors
|-
! Number
! Credits to
! Printer
! Layer
|-
| 700 || [[Village:Geraffel]] [[File:Geraffel 3D black.jpg|80px|thumb]] || YES, MANY ||
|-
| 275 || Sander || BambuLab H2D & X1C ||
|-
| 42 || {{UserLink|Jelmo2}} || ||
|-
| 34 || Rens Verhoeven || ||
|-
| 63 || {{UserLink|Edwinm}} || Prusa MK3 || 0.20mm
|-
| 12 || Gregor || ||
|-
| 30 || Fabian || ||
|-
| 28 || NinjaLikesCheeze || ||
|-
| >150 || Klaas ({{UserLink|KlaasYK}}) || Prusa Mk4 & Mk3S with emotional support from Ender 5 Pro and Friend <3 ||
|-
| 3 || Wouter || ||
|-
| 19 || Saskia ({{UserLink|Sassy}}) || Prusa MK4S || 0.20mm
|-
| 100 || {{UserLink|rick}} || Prusa MK4S|| 0.20mm
|-
| 58 || Wouter ({{UserLink|Pa3weg}}) || Bambu LAN P1S || 0.20mm
|-
| >45 || Alex ({{UserLink|Tinyledmatrix}}) || Prusa MK2, Bambulab A1 Mini, Qidi X-Smart3 ||
|-
| 50 || Jan-Willem ({{UserLink|jwrm22}}) || Bambu Lab P1S || 0.20mm, suport material stacks
|-
| 105 || Michael ({{UserLink|MikeS}}) || Prusa MK3.9 and two dusted off MK2.5's ||
|-
| >50 || Henri ({{UserLink|Fashice}}) || ||
|-
| >20 || {{UserLink|Dude77}} || Bambu Lab P1S || 0.20mm
|-
| 4 || {{UserLink|Luxim}} || Ender 3 v3 KE || 0.20mm
|-
|11 || {{UserLink|Galactum}} || Bambu Lab A1 || 0.20mm
|-
|20 || {{UserLink|MagicalDuck}} || Ender 3 || 0.24mm
|-
|>20 || {{UserLink|Willow}} || Bambu Lab P1S || 0.20mm
|-
|15 || {{UserLink|Jap}} || Bambu Lab P1S || 0.20mm
|-
|>10 || {{UserLink|Habbie}} || Bambu Lab A1 || 0.20mm
|-
|>10 || {{UserLink|Sndrsmnk}} || Bambu Lab P1S || 0.20mm
|-
|17 || {{UserLink|LordGaav}} || Voron V2.4 (V2.4523) || 0.20mm
|-
|4 || {{UserLink|Xylitol}} || CR-10S Pro || 0.20mm
|-
|6 || {{UserLink|Foorschtbar}} || Prusa XL || 0.20mm
|-
|11 || {{UserLink|Bx}} || Bambu Lab X1C || 0.20mm
|-
|>20 || {{UserLink|Iikkak}} || Ender 3 S1 pro || 0.20mm
|-
| ??? || You? || ||
|}

Current total: '''>1818''' units printed / 3500 needed (51%)

Add your amount and name to this list. Thank you.

== Badge Case Info ==

Currently cases are designed around the prototype PCBs. The final boards might be slightly different, so best advise is currently to wait until (after) the camp with printing one - the badges will be usable without a case. Instead, maybe help with printing the 3mm full-frame spaces (see above).

• Designing your own case? Use the existing screw holes on the badge.
• Bring M2 screws, up to 15 mm in length depending on your case design.
• Badges function fully without a case.
• Note: Cases take much longer to print than spacers.

Case Examples by the community:
https://www.printables.com/model/1372316-why2025-badge-case

== Badge Assembly at BadgeTent ==

We aim to conduct the full-scale assembly during the whole day of Friday, which will involve a maximum of 30 volunteers working in the 15*15 meters BadgeTent.

Assembly involves screwing everything together.

Assembling your first '''WHY2025''' badge might feel overwhelming, that’s okay.

Take your time, explore the parts, and build confidence.

With repetition:
* 1st time = You're learning. -> Instructions on how to handle the components will be provided.
* 5th time = You gain confidence by knowing your tools and how to grab them the best way.
* 500th time = Congratulations, you have accomplished the assembly and will have a Foxconn recruiter on the line.

Parts to assemble:
* CarrierBoard
* Keyboard Dome Layer
* Keyboard Silicon Layer
* 3mm Spacers
* 4x M2 Screws
* Front Panel PCB

If you want to help out in the Badge Assembly on Friday during the day -> then join this Signal group.

[https://signal.group/#CjQKIIORCgY9yjX3a834iz-RQeOQu80fIZtg-i3G56EYqnaQEhBaRn9aHmtLggM6oH7dWXC5 Badge Assembly - Signal group].

== Badge handout at BadgeTent ==

Starting: Friday 19:00 at BadgeTent

== LoRa Details ==

• The LoRa connector will not be pre-soldered but will be handed out as a compontent separately.

• You’ll also receive a screw-on LoRa antenna.

== Photo Sections ==

Pictures of 3D printed Full-frame Spacers:

[[File:Signal-2025-08-04-11-10-44-889.jpg|300px]]

[[File:Geraffel printed.jpg|300px]]

Pictures of WHY2025 Badge Cases:

[[File:Signal-2025-08-03-15-22-08-679.jpg|300px]]

[[File:Signal-2025-08-03-15-22-15-031.jpg|300px]]

[[File:20250804_140303.jpg|300px]]

Pictures of Final WHY2025 Badges with LoRa Antenna:

Badge

2025-08-05T18:41:25Z

Rick:

<div class="col-wrap-col-50">
{{whybox|title=WHY2025 Badge|content=
* [https://why2025.org/post/494 Blogpost 01]
* [https://why2025.org/post/697 Blogpost 02]
* [https://www.youtube.com/watch?v=-uMUSUYVGkU WHYCast Episode41]
* [https://tweakers.net/geek/237414/dit-is-de-why2025-badge-met-twee-esp32s-en-een-loramodule.html Tweakers article]
* [https://gitlab.com/why2025/team-badge Team:Badge GitLab repo] (files + documentation)
* [https://badge.why2025.org/ BadgeHub]
* WHY2025 Badge comes with two 18650 round battery cells, you don't need to buy cells before the event.
}}
</div>
<br>

Yes, we have a dedicated '''WHY2025 Badge Updates''' Signal group.

-> Feel free to share this new - '''WHY2025 Badge Updates''' - Signal group link with everyone at WHY2025.

https://signal.group/#CjQKINdiQ_2mg4ZIZ9AbjD5UHq8gnIgRojSTnOb6lbx-Tvh_EhDHBzcPicIer3NabcN0fuR9

yes, we're expecting this to become a big one :)

Thank you.

== We could use your help. ==

We need your support for printing the 3mm Full-frame Spacer.

If you want to help out then join the Signal group.

[https://signal.group/#CjQKIBzawhrMtrLuA-5d-J9omT2VW5gqnvtaXRbojytjGzoeEhAzItv1WoFWVkqlxx3GTaZc 3D printed spacer - Signal group]

Do you have a 3D printer and want to help print badge cases or spacers? Great.

=== 3mm Full-frame Spacers ===

We still need many more of these 3mm Full-frame spacers, any contributions are much appreciated.

Get the STL from [https://gitlab.com/why2025/team-badge/Hardware/-/blob/main/Spacer/3d_print/Full_Spacer_with_LoRa_Antenna_WHY2025.stl?ref_type=heads our Gitlab].

A few notes on printing:
* Most prints will be in PLA, so use that if possible.
* Avoid stack prints or anything that might create uneven surfaces on the prints.
* Color doesn't matter - use whatever you'd like.

* There are two options for the spacer thickness endresult:
* Option 1. A spacer thickness of 3mm everywhere. This is great.
* Option 2. A spacer thickness of 3mm in the top part. That is the display area.
* and 2.9 mm in the lower part. That is the keyboard area.

* There will be some 3D printers available at camp, so printing will continue during the event, but the more units we can make before then, the better.

== 3mm Full-frame Spacer Status ==

=== Current Contributors ===
{| class="wikitable"
|+ Full-frame Spacer Contributors
|-
! Number
! Credits to
! Printer
! Layer
|-
| 600 || [[Village:Geraffel]] [[File:Geraffel 3D black.jpg|80px|thumb]] || YES, MANY ||
|-
| 250 || Sander || BambuLab H2D & X1C ||
|-
| 42 || {{UserLink|Jelmo2}} || ||
|-
| 34 || Rens Verhoeven || ||
|-
| 63 || {{UserLink|Edwinm}} || Prusa MK3 || 0.20mm
|-
| 12 || Gregor || ||
|-
| 30 || Fabian || ||
|-
| 28 || NinjaLikesCheeze || ||
|-
| >50 + 42 || Klaas ({{UserLink|KlaasYK}}) || Prusa Mk4 & Mk3S with emotional support from Ender 5 Pro and Friend <3 ||
|-
| 3 || Wouter || ||
|-
| 19 || Saskia ({{UserLink|Sassy}}) || Prusa MK4S || 0.20mm
|-
| 80 || {{UserLink|rick}} || Prusa MK4S|| 0.20mm
|-
| 58 || Wouter ({{UserLink|Pa3weg}}) || Bambu LAN P1S || 0.20mm
|-
| >45 || Alex ({{UserLink|Tinyledmatrix}}) || Prusa MK2, Bambulab A1 Mini, Qidi X-Smart3 ||
|-
| >30 || Jan-Willem ({{UserLink|jwrm22}}) || Bambu Lab P1S || 0.20mm, suport material stacks
|-
| >80 || Michael ({{UserLink|MikeS}}) || Prusa MK3.9 and two dusted off MK2.5's ||
|-
| >20 || Henri ({{UserLink|Fashice}}) || ||
|-
| >20 || {{UserLink|Dude77}} || Bambu Lab P1S || 0.20mm
|-
| 4 || {{UserLink|Luxim}} || Ender 3 v3 KE || 0.20mm
|-
|11 || {{UserLink|Galactum}} || Bambu Lab A1 || 0.20mm
|-
|20 || {{UserLink|MagicalDuck}} || Ender 3 || 0.24mm
|-
|>10 || {{UserLink|Willow}} || Bambu Lab P1S || 0.20mm
|-
|15 || {{UserLink|Jap}} || Bambu Lab P1S || 0.20mm
|-
|>10 || {{UserLink|Habbie}} || Bambu Lab A1 || 0.20mm
|-
|>10 || {{UserLink|Sndrsmnk}} || Bambu Lab P1S || 0.20mm
|-
| ??? || You? || ||
|}

Current total: '''>1561''' units printed / 3500 needed (~45%)

Add your amount and name to this list. Thank you.

== Badge Case Info ==

Currently cases are designed around the prototype PCBs. The final boards might be slightly different, so best advise is currently to wait until (after) the camp with printing one - the badges will be usable without a case. Instead, maybe help with printing the 3mm full-frame spaces (see above).

• Designing your own case? Use the existing screw holes on the badge.
• Bring M2 screws, up to 15 mm in length depending on your case design.
• Badges function fully without a case.
• Note: Cases take much longer to print than spacers.

Case Examples by the community:
https://www.printables.com/model/1372316-why2025-badge-case

== Badge Assembly at BadgeTent ==

We aim to conduct the full-scale assembly during the whole day of Friday, which will involve a maximum of 30 volunteers working in the 15*15 meters BadgeTent.

Assembly involves screwing everything together.

Assembling your first '''WHY2025''' badge might feel overwhelming, that’s okay.

Take your time, explore the parts, and build confidence.

With repetition:
* 1st time = You're learning. -> Instructions on how to handle the componetns will be provided.
* 5th time = You gain confidence by knowing your tools and how to grab them the best way.
* 500th time = Congratulations, you have accomplished the assebmly and will have a Foxconn recruiter on the line.

Parts to assemble:
* CarrierBoard
* Keyboard Dome Layer
* Keyboard Silicon Layer
* 3mm Spacers
* 4x M2 Screws
* Front Panel PCB

If you want to help out in the Badge Assembly on Friday during the day -> then join this Signal group.

[https://signal.group/#CjQKIIORCgY9yjX3a834iz-RQeOQu80fIZtg-i3G56EYqnaQEhBaRn9aHmtLggM6oH7dWXC5 Badge Assembly - Signal group].

== Badge handout at BadgeTent ==

Starting: Friday 19:00 at BadgeTent

== LoRa Details ==

• The LoRa connector will not be pre-soldered but will be handed out as a compontent separately.

• You’ll also receive a screw-on LoRa antenna.

== Photo Sections ==

Pictures of 3D printed Full-frame Spacers:

[[File:Signal-2025-08-04-11-10-44-889.jpg|300px]]

[[File:Geraffel printed.jpg|300px]]

Pictures of WHY2025 Badge Cases:

[[File:Signal-2025-08-03-15-22-08-679.jpg|300px]]

[[File:Signal-2025-08-03-15-22-15-031.jpg|300px]]

[[File:20250804_140303.jpg|300px]]

Pictures of Final WHY2025 Badges with LoRa Antenna:

Badge

2025-08-05T14:25:04Z

Rick:

<div class="col-wrap-col-50">
{{whybox|title=WHY2025 Badge|content=
* [https://why2025.org/post/494 Blogpost 01]
* [https://why2025.org/post/697 Blogpost 02]
* [https://www.youtube.com/watch?v=-uMUSUYVGkU WHYCast Episode41]
* [https://tweakers.net/geek/237414/dit-is-de-why2025-badge-met-twee-esp32s-en-een-loramodule.html Tweakers article]
* [https://gitlab.com/why2025/team-badge Team:Badge GitLab repo] (files + documentation)
* [https://badge.why2025.org/ BadgeHub]
* WHY2025 Badge comes with two 18650 round battery cells, you don't need to buy cells before the event.
}}
</div>
<br>

Yes, we have a dedicated '''WHY2025 Badge Updates''' Signal group.

-> Feel free to share this new - '''WHY2025 Badge Updates''' - Signal group link with everyone at WHY2025.

https://signal.group/#CjQKINdiQ_2mg4ZIZ9AbjD5UHq8gnIgRojSTnOb6lbx-Tvh_EhDHBzcPicIer3NabcN0fuR9

yes, we're expecting this to become a big one :)

Thank you.

== We could use your help. ==

We need your support for printing the 3mm Full-frame Spacer.

If you want to help out then join the Signal group.

[https://signal.group/#CjQKIBzawhrMtrLuA-5d-J9omT2VW5gqnvtaXRbojytjGzoeEhAzItv1WoFWVkqlxx3GTaZc 3D printed spacer - Signal group]

Do you have a 3D printer and want to help print badge cases or spacers? Great.

=== 3mm Full-frame Spacers ===

We still need many more of these 3mm Full-frame spacers, any contributions are much appreciated.

Get the STL from [https://gitlab.com/why2025/team-badge/Hardware/-/blob/main/Spacer/3d_print/Full_Spacer_with_LoRa_Antenna_WHY2025.stl?ref_type=heads our Gitlab].

A few notes on printing:
* Most prints will be in PLA, so use that if possible.
* Avoid stack prints or anything that might create uneven surfaces on the prints.
* Color doesn't matter - use whatever you'd like.

* There are two options for the spacer thickness endresult:
* Option 1. A spacer thickness of 3mm everywhere. This is great.
* Option 2. A spacer thickness of 3mm in the top part. That is the display area.
* and 2.9 mm in the lower part. That is the keyboard area.

* There will be some 3D printers available at camp, so printing will continue during the event, but the more units we can make before then, the better.

== 3mm Full-frame Spacer Status ==

=== Current Contributors ===
{| class="wikitable"
|+ Full-frame Spacer Contributors
|-
! Number
! Credits to
! Printer
! Layer
|-
| 600 || [[Village:Geraffel]] [[File:Geraffel 3D black.jpg|80px|thumb]] || YES, MANY ||
|-
| 250 || Sander || BambuLab H2D & X1C ||
|-
| 42 || {{UserLink|Jelmo2}} || ||
|-
| 34 || Rens Verhoeven || ||
|-
| 34 || Edwin || || 0.20mm
|-
| 12 || Gregor || ||
|-
| 30 || Fabian || ||
|-
| 28 || NinjaLikesCheeze || ||
|-
| >47 || Klaas ({{UserLink|KlaasYK}}) || Prusa Mk4 & Mk3S with emotional support from Ender 5 Pro ||
|-
| 3 || Wouter || ||
|-
| 19 || Saskia ({{UserLink|Sassy}}) || Prusa MK4S || 0.20mm
|-
| 65 || {{UserLink|rick}} || Prusa MK4S|| 0.20mm
|-
| 58 || Wouter ({{UserLink|Pa3weg}}) || Bambu LAN P1S || 0.2mm
|-
| >20 || Alex ({{UserLink|Tinyledmatrix}}) || ||
|-
| >30 || Jan-Willem ({{UserLink|jwrm22}}) || Bambu Lab P1S || 0.2, suport material stacks
|-
| >50 || Michael ({{UserLink|MikeS}}) || ||
|-
| >20 || Henri ({{UserLink|Fashice}}) || ||
|-
| >20 || {{UserLink|Dude77}} || Bambu Lab P1S || 0.2mm
|-
| 4 || {{UserLink|Luxim}} || Ender 3 v3 KE || 0.2mm
|-
|5 || {{UserLink|Galactum}} || Bambu Lab A1 || 0.20mm
|-
| ??? || You? || ||
|}

Current total: '''~1217''' units printed / 3500 needed (~34.8%)

Add your amount and name to this list. Thank you.

== Badge Case Info ==

Currently cases are designed around the prototype PCBs. The final boards might be slightly different, so best advise is currently to wait until (after) the camp with printing one - the badges will be usable without a case. Instead, maybe help with printing the 3mm full-frame spaces (see above).

• Designing your own case? Use the existing screw holes on the badge.
• Bring M2 screws, up to 15 mm in length depending on your case design.
• Badges function fully without a case.
• Note: Cases take much longer to print than spacers.

Case Examples by the community:
https://www.printables.com/model/1372316-why2025-badge-case

== Badge Assembly at BadgeTent ==

We aim to conduct the full-scale assembly during the whole day of Friday, which will involve a maximum of 30 volunteers working in the 15*15 meters BadgeTent.

Assembly involves screwing everything together.

Assembling your first '''WHY2025''' badge might feel overwhelming, that’s okay.

Take your time, explore the parts, and build confidence.

With repetition:
* 1st time = You're learning. -> Instructions on how to handle the componetns will be provided.
* 5th time = You gain confidence by knowing your tools and how to grab them the best way.
* 500th time = Congratulations, you have accomplished the assebmly and will have a Foxconn recruiter on the line.

Parts to assemble:
* CarrierBoard
* Keyboard Dome Layer
* Keyboard Silicon Layer
* 3mm Spacers
* 4x M2 Screws
* Front Panel PCB

If you want to help out in the Badge Assembly on Friday during the day -> then join this Signal group.

[https://signal.group/#CjQKIIORCgY9yjX3a834iz-RQeOQu80fIZtg-i3G56EYqnaQEhBaRn9aHmtLggM6oH7dWXC5 Badge Assembly - Signal group].

== Badge handout at BadgeTent ==

Starting: Friday 19:00 at BadgeTent

== LoRa Details ==

• The LoRa connector will not be pre-soldered but will be handed out as a compontent separately.

• You’ll also receive a screw-on LoRa antenna.

== Photo Sections ==

Pictures of 3D printed Full-frame Spacers:

[[File:Signal-2025-08-04-11-10-44-889.jpg|300px]]

[[File:Geraffel printed.jpg|300px]]

Pictures of WHY2025 Badge Cases:

[[File:Signal-2025-08-03-15-22-08-679.jpg|300px]]

[[File:Signal-2025-08-03-15-22-15-031.jpg|300px]]

[[File:20250804_140303.jpg|300px]]

Pictures of Final WHY2025 Badges with LoRa Antenna:

Badge

2025-08-05T11:38:50Z

Rick:

<div class="col-wrap-col-50">
{{whybox|title=WHY2025 Badge|content=
* [https://why2025.org/post/494 Blogpost 01]
* [https://why2025.org/post/697 Blogpost 02]
* [https://www.youtube.com/watch?v=-uMUSUYVGkU WHYCast Episode41]
* [https://tweakers.net/geek/237414/dit-is-de-why2025-badge-met-twee-esp32s-en-een-loramodule.html Tweakers article]
* [https://gitlab.com/why2025/team-badge Team:Badge GitLab repo] (files + documentation)
* [https://badge.why2025.org/ BadgeHub]
* WHY2025 Badge comes with two 18650 round battery cells, you don't need to buy cells before the event.
}}
</div>
<br>

Yes, we have a dedicated '''WHY2025 Badge Updates''' Signal group.

-> Feel free to share this new - '''WHY2025 Badge Updates''' - Signal group link with everyone at WHY2025.

https://signal.group/#CjQKINdiQ_2mg4ZIZ9AbjD5UHq8gnIgRojSTnOb6lbx-Tvh_EhDHBzcPicIer3NabcN0fuR9

yes, we're expecting this to become a big one :)

Thank you.

== We could use your help. ==

We need your support for printing the 3mm Full-frame Spacer.

If you want to help out then join the Signal group.

[https://signal.group/#CjQKIBzawhrMtrLuA-5d-J9omT2VW5gqnvtaXRbojytjGzoeEhAzItv1WoFWVkqlxx3GTaZc 3D printed spacer - Signal group]

Do you have a 3D printer and want to help print badge cases or spacers? Great.

=== 3mm Full-frame Spacers ===

We still need many more of these 3mm Full-frame spacers, any contributions are much appreciated.

Get the STL from [https://gitlab.com/why2025/team-badge/Hardware/-/blob/main/Spacer/3d_print/Full_Spacer_with_LoRa_Antenna_WHY2025.stl?ref_type=heads our Gitlab].

A few notes on printing:
* Most prints will be in PLA, so use that if possible.
* Avoid stack prints or anything that might create uneven surfaces on the prints.
* Color doesn't matter - use whatever you'd like.

* There are two options for the spacer thickness endresult:
* Option 1. A spacer thickness of 3mm everywhere. This is great.
* Option 2. A spacer thickness of 3mm in the top part. That is the display area.
* and 2.9 mm in the lower part. That is the keyboard area.

* There will be some 3D printers available at camp, so printing will continue during the event, but the more units we can make before then, the better.

== 3mm Full-frame Spacer Status ==

=== Current Contributors ===
{| class="wikitable"
|+ Full-frame Spacer Contributors
|-
! Number
! Credits to
! Printer
! Layer
|-
| 500 || [[Village:Geraffel]] [[File:Geraffel 3D black.jpg|80px|thumb]] || ||
|-
| 250 || Sander || ||
|-
| 42 || {{UserLink|Jelmo2}} || ||
|-
| 34 || Rens Verhoeven || ||
|-
| 34 || Edwin || || 0.20mm
|-
| 12 || Gregor || ||
|-
| 30 || Fabian || ||
|-
| 28 || NinjaLikesCheeze || ||
|-
| >47 || Klaas ({{UserLink|KlaasYK}}) || ||
|-
| 3 || Wouter || ||
|-
| 10 || Saskia || ||
|-
| 65 || {{UserLink|rick}} || ||
|-
| 42 || Wouter ({{UserLink|Pa3weg}}) || Bambu LAN P1S || 0.2mm
|-
| >20 || Alex ({{UserLink|Tinyledmatrix}}) || ||
|-
| >20 || Jan-Willem ({{UserLink|jwrm22}}) || ||
|-
| >20 || Michael ({{UserLink|MikeS}}) || ||
|-
| >20 || Henri ({{UserLink|Fashice}}) || ||
|-
| >10 || {{UserLink|Dude77}} || ||
|-
| ??? || You? || ||
|}

Current total: '''~1048''' units printed / 3500 needed (~30%)

Add your amount and name to this list. Thank you.

== Badge Case Info ==

Currently cases are designed around the prototype PCBs. The final boards might be slightly different, so best advise is currently to wait until (after) the camp with printing one - the badges will be usable without a case. Instead, maybe help with printing the 3mm full-frame spaces (see above).

• Designing your own case? Use the existing screw holes on the badge.
• Bring M2 screws, up to 15 mm in length depending on your case design.
• Badges function fully without a case.
• Note: Cases take much longer to print than spacers.

Case Examples by the community:
https://www.printables.com/model/1372316-why2025-badge-case

== Badge Assembly at BadgeTent ==

We aim to conduct the full-scale assembly during the whole day of Friday, which will involve a maximum of 30 volunteers working in the 15*15 meters BadgeTent.

Assembly involves screwing everything together.

Assembling your first '''WHY2025''' badge might feel overwhelming, that’s okay.

Take your time, explore the parts, and build confidence.

With repetition:
* 1st time = You're learning. -> Instructions on how to handle the componetns will be provided.
* 5th time = You gain confidence by knowing your tools and how to grab them the best way.
* 500th time = Congratulations, you have accomplished the assebmly and will have a Foxconn recruiter on the line.

Parts to assemble:
* CarrierBoard
* Keyboard Dome Layer
* Keyboard Silicon Layer
* 3mm Spacers
* 4x M2 Screws
* Front Panel PCB

If you want to help out in the Badge Assembly on Friday during the day -> then join this Signal group.

[https://signal.group/#CjQKIIORCgY9yjX3a834iz-RQeOQu80fIZtg-i3G56EYqnaQEhBaRn9aHmtLggM6oH7dWXC5 Badge Assembly - Signal group].

== Badge handout at BadgeTent ==

Starting: Friday 19:00 at BadgeTent

== LoRa Details ==

• The LoRa connector will not be pre-soldered but will be handed out as a compontent separately.

• You’ll also receive a screw-on LoRa antenna.

== Photo Sections ==

Pictures of 3D printed Full-frame Spacers:

[[File:Signal-2025-08-04-11-10-44-889.jpg|300px]]

[[File:Geraffel printed.jpg|300px]]

Pictures of WHY2025 Badge Cases:

[[File:Signal-2025-08-03-15-22-08-679.jpg|300px]]

[[File:Signal-2025-08-03-15-22-15-031.jpg|300px]]

[[File:20250804_140303.jpg|300px]]

Pictures of Final WHY2025 Badges with LoRa Antenna:

User:Rick

2025-08-04T20:39:31Z

Rick:

{{UserInfo
|Bringing=Fun and Chaos xD
|Village=Village:Ccchh
|Arrival=2025-08-07
|Departure=2025-08-12
|EMail=rick@n0id.space
|Mastodon=@rick@a.n0id.space
|DECT=4667
|Languages=DE/EN
|NickName={{PAGENAME}}
}}
Linux Engineer and Weeb
Loves to tinker around with Linux/Electronic stuff since 1995
Also likes to design and print stuff with 3dprinters.
Has way to many hobbies for his freetime...

Village:Ccchh

2025-08-04T18:00:06Z

Rick:

{{Village
|Has name=CCCHH
|Has website=hamburg.ccc.de
|Has description=Comfy people from Hamburg & Friends
|Village is open to newcomers=No
|Provides session location=No
|Location=52.69137, 4.74501
|Has orga contact=why2025-village@lists.hamburg.ccc.de
|On site orga contact=3274 (hopefully)
|Village frab=no
|Village content space=no
|Village citizen count=35
|Village Needs power=Smaller Village (up to 2x 230V/Schuko)
|Village size needed=250
|Village hacktents num=3
|Village brings big stuff=No
}}
Comfy people from Hamburg & Friends

File:User-Rick.png

2025-08-04T17:55:38Z

Rick:

Badge

2025-08-04T17:54:12Z

Rick:

<div class="col-wrap-col-50">
{{whybox|title=WHY2025 Badge|content=
* [https://why2025.org/post/494 Blogpost 01]
* [https://why2025.org/post/697 Blogpost 02]
* [https://www.youtube.com/watch?v=-uMUSUYVGkU WHYCast Episode41]
* [https://tweakers.net/geek/237414/dit-is-de-why2025-badge-met-twee-esp32s-en-een-loramodule.html Tweakers article]
* [https://gitlab.com/why2025/team-badge Team:Badge GitLab repo] (files + documentation)
* [https://badge.why2025.org/ BadgeHub]
* Badge kits will come with two 18650 included, you don't need to buy cells before the event
}}
</div>
<br>

== We could use your help. ==

'''TL;DR:'''
We need your support for printing the Full-frame Spacer. Join the [https://signal.group/#CjQKIBzawhrMtrLuA-5d-J9omT2VW5gqnvtaXRbojytjGzoeEhAzItv1WoFWVkqlxx3GTaZc Signal group] if you want to help out.

Do you have a 3D printer and want to help print badge cases or spacers? Great.

Join the conversation and coordination on our [https://signal.group/#CjQKIBzawhrMtrLuA-5d-J9omT2VW5gqnvtaXRbojytjGzoeEhAzItv1WoFWVkqlxx3GTaZc 3D printed space Signal group].

=== Full-frame Spacers ===
We still need many more of these, so any contributions are much appreciated.
Get the STL from [https://gitlab.com/why2025/team-badge/Hardware/-/blob/main/Spacer/3d_print/Full_Spacer_with_LoRa_Antenna_WHY2025.stl?ref_type=heads our Gitlab].
A few notes on printing:
* Most prints will be in PLA, so use that if possible.
* Avoid stack prints or anything that might create uneven surfaces on the prints.
* Color doesn't matter - use whatever you'd like.
* There will be some 3D printers available at camp, so printing will continue during the event, but the more units we can make before then, the better.

== Spacer Production Status ==

=== Contributors ===

{| class="wikitable"
|+ Small-part Spacer Contributions
|-
! Number !! Credits to
|-
| 4,900 || @L
|-
| 3,800|| @Rens Verhoeven
|-
| 2,200 || Q42 (work by @Rens Verhoeven)
|-
| 3,000|| @Frank Bouwens at @Rens Verhoeven
|-
| 3,000|| @NinjaLikesCheez at @Rens Verhoeven
|-
| 1,350|| {{UserLink|Dynom}}
|}

We’ve already printed 18,250 units, exceeding the required 14,500.

-> '''No additional small-part spacers are needed. A big thank you to our contributors.'''

-> '''If you want to help out, have a look at the Full-frame Spacer printing activity below.'''

== Full-frame Spacer Status ==

=== Current Contributors ===
{| class="wikitable"
|+ Full-frame Spacer Contributors
|-
! Number !! Credits to

|-
| 400 || [[Village:Geraffel]] [[File:Geraffel 3D black.jpg|80px|thumb]]
|-
| 200 || Sander
|-
| 42 || {{UserLink|Jelmo2}}
|-
| 34 || Rens Verhoeven
|-
| 34 || Edwin
|-
| 12 || Gregor
|-
| 20 || Fabian
|-
| 3 || Wouter
|-
| 50 || {{UserLink|rick}}
|-
| ? || {{UserLink|Pa3weg}}
|-
| tbd || Alex ({{UserLink|Tinyledmatrix}})
|-
| ??? || You?
|}

Current total: '''~750''' units printed / 3500 needed (~21%)

Add your amount and name to this list. Thank you.

== Badge Case Info ==

Currently cases are designed around the prototype PCBs. The final boards might be slightly different, so best advise is currently to wait until (after) the camp with printing one - the badges will be usable without them. Instead, maybe help with printing full spaces (see above).

• Designing your own case? Use the existing screw holes on the badge.
• Bring M2 screws, up to 15 mm in length depending on your case design.
• Badges function fully without a case.
• Note: Cases take longer to print than spacers.

Case Examples by the community:
https://www.printables.com/model/1372316-why2025-badge-case

== Badge Assembly at BadgeTent ==

Assembling your first '''WHY2025''' badge might feel overwhelming, that’s okay.

Take your time, explore the parts, and build confidence.

With repetition:
• 1st time = Learning
• 5th time = Confident
• 500th time = You will have a Foxconn recruiter on the line.

Parts to assemble:
• CarrierBoard
• Keyboard Dome Layer
• Keyboard Silicon Layer
• Spacers
• 4x M2 Screws
• Front Panel PCB

Assembly involves screwing everything together.

Badge pickup and assembly at BadgeTent.

-> '''Exact start time and day will be announced.'''

== LoRa Details ==

• The LoRa connector will not be pre-soldered but will be handed out separately.

• You’ll also receive a screw-on LoRa antenna.

== Photo Sections ==

Pictures of 3D printed Full-frame Spacers:

[[File:Signal-2025-08-04-11-10-44-889.jpg|300px]]

[[File:Geraffel printed.jpg|300px]]

Pictures of WHY2025 Badge Cases:

[[File:Signal-2025-08-03-15-22-08-679.jpg|300px]]

[[File:Signal-2025-08-03-15-22-15-031.jpg|300px]]

[[File:20250804_140303.jpg|300px]]

Pictures of Final WHY2025 Badges with LoRa Antenna:

Badge

2025-08-04T17:53:54Z

Rick:

<div class="col-wrap-col-50">
{{whybox|title=WHY2025 Badge|content=
* [https://why2025.org/post/494 Blogpost 01]
* [https://why2025.org/post/697 Blogpost 02]
* [https://www.youtube.com/watch?v=-uMUSUYVGkU WHYCast Episode41]
* [https://tweakers.net/geek/237414/dit-is-de-why2025-badge-met-twee-esp32s-en-een-loramodule.html Tweakers article]
* [https://gitlab.com/why2025/team-badge Team:Badge GitLab repo] (files + documentation)
* [https://badge.why2025.org/ BadgeHub]
* Badge kits will come with two 18650 included, you don't need to buy cells before the event
}}
</div>
<br>

== We could use your help. ==

'''TL;DR:'''
We need your support for printing the Full-frame Spacer. Join the [https://signal.group/#CjQKIBzawhrMtrLuA-5d-J9omT2VW5gqnvtaXRbojytjGzoeEhAzItv1WoFWVkqlxx3GTaZc Signal group] if you want to help out.

Do you have a 3D printer and want to help print badge cases or spacers? Great.

Join the conversation and coordination on our [https://signal.group/#CjQKIBzawhrMtrLuA-5d-J9omT2VW5gqnvtaXRbojytjGzoeEhAzItv1WoFWVkqlxx3GTaZc 3D printed space Signal group].

=== Full-frame Spacers ===
We still need many more of these, so any contributions are much appreciated.
Get the STL from [https://gitlab.com/why2025/team-badge/Hardware/-/blob/main/Spacer/3d_print/Full_Spacer_with_LoRa_Antenna_WHY2025.stl?ref_type=heads our Gitlab].
A few notes on printing:
* Most prints will be in PLA, so use that if possible.
* Avoid stack prints or anything that might create uneven surfaces on the prints.
* Color doesn't matter - use whatever you'd like.
* There will be some 3D printers available at camp, so printing will continue during the event, but the more units we can make before then, the better.

== Spacer Production Status ==

=== Contributors ===

{| class="wikitable"
|+ Small-part Spacer Contributions
|-
! Number !! Credits to
|-
| 4,900 || @L
|-
| 3,800|| @Rens Verhoeven
|-
| 2,200 || Q42 (work by @Rens Verhoeven)
|-
| 3,000|| @Frank Bouwens at @Rens Verhoeven
|-
| 3,000|| @NinjaLikesCheez at @Rens Verhoeven
|-
| 1,350|| {{UserLink|Dynom}}
|}

We’ve already printed 18,250 units, exceeding the required 14,500.

-> '''No additional small-part spacers are needed. A big thank you to our contributors.'''

-> '''If you want to help out, have a look at the Full-frame Spacer printing activity below.'''

== Full-frame Spacer Status ==

=== Current Contributors ===
{| class="wikitable"
|+ Full-frame Spacer Contributors
|-
! Number !! Credits to

|-
| 400 || [[Village:Geraffel]] [[File:Geraffel 3D black.jpg|80px|thumb]]
|-
| 200 || Sander
|-
| 42 || {{UserLink|Jelmo2}}
|-
| 34 || Rens Verhoeven
|-
| 34 || Edwin
|-
| 12 || Gregor
|-
| 20 || Fabian
|-
| 3 || Wouter
|-
| 30 || {{UserLink|rick}}
|-
| ? || {{UserLink|Pa3weg}}
|-
| tbd || Alex ({{UserLink|Tinyledmatrix}})
|-
| ??? || You?
|}

Current total: '''~750''' units printed / 3500 needed (~21%)

Add your amount and name to this list. Thank you.

== Badge Case Info ==

Currently cases are designed around the prototype PCBs. The final boards might be slightly different, so best advise is currently to wait until (after) the camp with printing one - the badges will be usable without them. Instead, maybe help with printing full spaces (see above).

• Designing your own case? Use the existing screw holes on the badge.
• Bring M2 screws, up to 15 mm in length depending on your case design.
• Badges function fully without a case.
• Note: Cases take longer to print than spacers.

Case Examples by the community:
https://www.printables.com/model/1372316-why2025-badge-case

== Badge Assembly at BadgeTent ==

Assembling your first '''WHY2025''' badge might feel overwhelming, that’s okay.

Take your time, explore the parts, and build confidence.

With repetition:
• 1st time = Learning
• 5th time = Confident
• 500th time = You will have a Foxconn recruiter on the line.

Parts to assemble:
• CarrierBoard
• Keyboard Dome Layer
• Keyboard Silicon Layer
• Spacers
• 4x M2 Screws
• Front Panel PCB

Assembly involves screwing everything together.

Badge pickup and assembly at BadgeTent.

-> '''Exact start time and day will be announced.'''

== LoRa Details ==

• The LoRa connector will not be pre-soldered but will be handed out separately.

• You’ll also receive a screw-on LoRa antenna.

== Photo Sections ==

Pictures of 3D printed Full-frame Spacers:

[[File:Signal-2025-08-04-11-10-44-889.jpg|300px]]

[[File:Geraffel printed.jpg|300px]]

Pictures of WHY2025 Badge Cases:

[[File:Signal-2025-08-03-15-22-08-679.jpg|300px]]

[[File:Signal-2025-08-03-15-22-15-031.jpg|300px]]

[[File:20250804_140303.jpg|300px]]

Pictures of Final WHY2025 Badges with LoRa Antenna:

User:Rick

2025-08-02T11:14:20Z

Rick:

{{UserInfo
|Bringing=Fun and Chaos xD
|Village=Village:Ccchh
|Arrival=2025-08-07
|Departure=2025-08-12
|EMail=rick@n0id.space
|Mastodon=@rick@a.n0id.space
|DECT=4667
|Languages=EN
|NickName={{PAGENAME}}
}}
Linux Engineer and Weeb
Loves to tinker around with Linux/Electronic stuff since 1995
Also likes to design and print stuff with 3dprinters.
Has way to many hobbies for his freetime...

User:Rick

2025-07-27T14:49:34Z

Rick:

{{UserInfo
|Bringing=Fun and Chaos xD
|Village=Village:Ccchh
|Arrival=2025-08-06
|Departure=2025-08-12
|EMail=rick@n0id.space
|Mastodon=@rick@a.n0id.space
|DECT=4667
|Languages=EN
|NickName={{PAGENAME}}
}}
Linux Engineer and Weeb
Loves to tinker around with Linux/Electronic stuff since 1995
Also likes to design and print stuff with 3dprinters.
Has way to many hobbies for his freetime...

User:Rick

2025-07-27T14:48:44Z

Rick:

{{UserInfo
|Bringing=FUN
|Village=Village:Ccchh
|Arrival=2025-08-06
|Departure=2025-08-12
|EMail=rick@n0id.space
|Mastodon=@rick@a.n0id.space
|DECT=4667
|Languages=EN
|NickName={{PAGENAME}}
}}
Linux Engineer and Weeb
Loves to tinker around with Linux/Electronic stuff since 1995
Also likes to design and print stuff with 3dprinters.
Has way to many hobbies for his freetime...

User:Rick

2025-07-27T14:48:02Z

Rick:

{{UserInfo
|Village=Village:Ccchh
|Arrival=2025-08-06
|Departure=2025-08-12
|EMail=rick@n0id.space
|Mastodon=@rick@a.n0id.space
|DECT=4667
|Languages=EN
|NickName={{PAGENAME}}
}}

User:Rick

2025-07-27T14:45:45Z

Rick: create user page

{{UserInfo
|NickName={{PAGENAME}}
|Languages=EN
|HackerSpace=
}}