WHY2025 wiki - User contributions [en]

Badge

2025-08-07T21:47:02Z

Renssies: /* Current Contributors */

<div class="col-wrap-col-50">
{{whybox|title=WHY2025 Badge|content=
* [https://why2025.org/post/494 Blogpost 01]
* [https://why2025.org/post/697 Blogpost 02]
* [https://www.youtube.com/watch?v=-uMUSUYVGkU WHYCast Episode41]
* [https://tweakers.net/geek/237414/dit-is-de-why2025-badge-met-twee-esp32s-en-een-loramodule.html Tweakers article]
* [https://gitlab.com/why2025/team-badge Team:Badge GitLab repo] (files + documentation)
* [https://badge.why2025.org/ BadgeHub]
* WHY2025 Badge comes with two 18650 round battery cells, you don't need to buy cells before the event.
* ⚠️ [[Badge/Fire hazard]]
}}
</div>
<br>

Yes, we have a dedicated '''WHY2025 Badge Updates''' Signal group.

-> Feel free to share this new - '''WHY2025 Badge Updates''' - Signal group link with everyone at WHY2025.

https://signal.group/#CjQKINdiQ_2mg4ZIZ9AbjD5UHq8gnIgRojSTnOb6lbx-Tvh_EhDHBzcPicIer3NabcN0fuR9

yes, we're expecting this to become a big one :)

Thank you.

== We could use your help. ==

We need your support for printing the 3mm Full-frame Spacer.

If you want to help out then join the Signal group.

[https://signal.group/#CjQKIBzawhrMtrLuA-5d-J9omT2VW5gqnvtaXRbojytjGzoeEhAzItv1WoFWVkqlxx3GTaZc 3D printed spacer - Signal group]

Do you have a 3D printer and want to help print badge cases or spacers? Great.

=== 3mm Full-frame Spacers ===

We still need many more of these 3mm Full-frame spacers, any contributions are much appreciated.

Get the STL from [https://gitlab.com/why2025/team-badge/Hardware/-/blob/main/Spacer/3d_print/Full_Spacer_with_LoRa_Antenna_WHY2025.stl?ref_type=heads our Gitlab].

A few notes on printing:
* Most prints will be in PLA, so use that if possible.
* Avoid stack prints or anything that might create uneven surfaces on the prints.
* Color doesn't matter - use whatever you'd like.

* There are two options for the spacer thickness endresult:
* Option 1. A spacer thickness of 3mm everywhere. This is great.
* Option 2. A spacer thickness of 3mm in the top part. That is the display area.
* and 2.9 mm in the lower part. That is the keyboard area.

* There will be some 3D printers available at camp, so printing will continue during the event, but the more units we can make before then, the better.

== 3mm Full-frame Spacer Status ==

=== Current Contributors ===
{| class="wikitable"
|+ Full-frame Spacer Contributors
|-
! Number
! Credits to
! Printer
! Layer
|-
| 783 || [[Village:Geraffel]] [[File:Geraffel 3D black.jpg|80px|thumb]] || YES, MANY ||
|-
| 320 || Sander {{UserLink|Jar0d}} || BambuLab H2D & X1C ||
|-
| 42 || {{UserLink|Jelmo2}} || ||
|-
| 60 || {{UserLink|Renssies}} || - Bambu Lab X1C 2x (1 @ home, 1 @ work)<br />- Bambu Lab A1 (@ Pixelbar, now @ Village) || 0.20mm
|-
| 86 || {{UserLink|Edwinm}} || Prusa MK3 || 0.20mm
|-
| 174 || {{UserLink|krekr}} (Gregor) || Creality K1 Max || 0.2mm
|-
| 30 || Fabian || ||
|-
| 10 || Frankkie || ||
|-
| 28 || NinjaLikesCheeze || ||
|-
| 200 || Klaas ({{UserLink|KlaasYK}}) & Harry & Ilja || Prusa Mk4 & Mk3S and a big thank you to DJO Groningen! ||
|-
| 3 || Wouter || ||
|-
| 46 || Saskia ({{UserLink|Sassy}}) || Prusa MK4S || 0.20mm
|-
| 100 || {{UserLink|rick}} || Prusa MK4S|| 0.20mm
|-
| 58 || Wouter ({{UserLink|Pa3weg}}) || Bambu LAN P1S || 0.20mm
|-
| >45 || Alex ({{UserLink|Tinyledmatrix}}) || Prusa MK2, Bambulab A1 Mini, Qidi X-Smart3 ||
|-
| 50 || Jan-Willem ({{UserLink|jwrm22}}) || Bambu Lab P1S || 0.20mm, suport material stacks
|-
| 105 || Michael ({{UserLink|MikeS}}) || Prusa MK3.9 and two dusted off MK2.5's ||
|-
| >60 || Henri ({{UserLink|Fashice}}) | already at badge tent| ||
|-
| 68 || {{UserLink|Dude77}} || Bambu Lab P1S || 0.20mm
|-
| 5 || {{UserLink|Luxim}} || Ender 3 v3 KE || 0.20mm
|-
|11 || {{UserLink|Galactum}} || Bambu Lab A1 || 0.20mm
|-
|20 || {{UserLink|MagicalDuck}} || Ender 3 || 0.24mm
|-
|40 || {{UserLink|Willow}} || Bambu Lab P1S || 0.20mm
|-
|30 || {{UserLink|Jap}} || Bambu Lab P1S || 0.20mm
|-
|>10 || {{UserLink|Habbie}} || Bambu Lab A1 || 0.20mm
|-
|71 || {{UserLink|Sndrsmnk}} || Bambu Lab P1S || 0.20mm
|-
|32 || {{UserLink|LordGaav}} || Voron V2.4 (V2.4523) || 0.20mm
|-
|4 || {{UserLink|Xylitol}} || CR-10S Pro || 0.20mm
|-
|6 || {{UserLink|Foorschtbar}} || Prusa XL || 0.20mm
|-
|11 || {{UserLink|Bx}} || Bambu Lab X1C || 0.20mm
|-
|>20 || {{UserLink|Iikkak}} || Ender 3 S1 pro || 0.20mm
|-
|9 || {{UserLink|q3k}} || MK3S+ || 0.20mm
|-
|10> || {{userLink|Jayblue}} || Flashforge Adventurer 5M || 0.20mm
|-
|2 || {{userLink|Miizix}} || Ender 3 || 0.20mm
|-
|24 || {{userLink|ScoutHack42}} || Bambu Lab A1 || 0.20mm
|-
|6 || {{userLink|FrancisD}} || GEEETECH A20 || 0.20mm
|-
| ??? || You? || ||
|}

Current total: '''>2579''' units printed / 3500 needed (73.7%)

Add your amount and name to this list. Thank you.

== Badge Case Info ==

Currently cases are designed around the prototype PCBs. The final boards might be slightly different, so best advise is currently to wait until (after) the camp with printing one - the badges will be usable without a case. Instead, maybe help with printing the 3mm full-frame spaces (see above).

• Designing your own case? Use the existing screw holes on the badge.
• Bring M2 screws, up to 15 mm in length depending on your case design.
• Badges function fully without a case.
• Note: Cases take much longer to print than spacers.

Case Examples by the community:
https://www.printables.com/model/1372316-why2025-badge-case

== Badge Assembly at BadgeTent ==

We aim to conduct the full-scale assembly during the whole day of Friday, which will involve a maximum of 30 volunteers working in the 15*15 meters BadgeTent.

Assembly involves screwing everything together.

Assembling your first '''WHY2025''' badge might feel overwhelming, that’s okay.

Take your time, explore the parts, and build confidence.

With repetition:
* 1st time = You're learning. -> Instructions on how to handle the components will be provided.
* 5th time = You gain confidence by knowing your tools and how to grab them the best way.
* 500th time = Congratulations, you have accomplished the assembly and will have a Foxconn recruiter on the line.

Parts to assemble:
* CarrierBoard
* Keyboard Dome Layer
* Keyboard Silicon Layer
* 3mm Spacers
* 4x M2 Screws
* Front Panel PCB

If you want to help out in the Badge Assembly on Friday during the day -> then join this Signal group.

[https://signal.group/#CjQKIIORCgY9yjX3a834iz-RQeOQu80fIZtg-i3G56EYqnaQEhBaRn9aHmtLggM6oH7dWXC5 Badge Assembly - Signal group].

== Lessons Learned during Badge Assembly ==

We encountered a small number of badges (three in total) where the Keyboard Dome Layer was slightly misaligned, leading to a few non-responsive keys. Thanks to our initial test-flashing process, we were able to detect these issues early and have since improved our application method for the Dome Layer.

To ensure quality, every badge will undergo a final quality control check, including a visual inspection of the epoxy and final firmware flashing, so that everyone receives a fully functional badge.

== Badge handout at BadgeTent ==

Starting: Friday 19:00 at BadgeTent

== LoRa Details ==

• The LoRa connector will not be pre-soldered but will be handed out as a compontent separately.

• You’ll also receive a screw-on LoRa antenna.

== Photo Sections ==

Pictures of 3D printed Full-frame Spacers:

[[File:Signal-2025-08-04-11-10-44-889.jpg|300px]]

[[File:Geraffel printed.jpg|300px]]

Pictures of WHY2025 Badge Cases:

[[File:Signal-2025-08-03-15-22-08-679.jpg|300px]]

[[File:Signal-2025-08-03-15-22-15-031.jpg|300px]]

[[File:20250804_140303.jpg|300px]]

Pictures of Final WHY2025 Badges with LoRa Antenna:

Badge

2025-08-07T21:46:35Z

Renssies: /* Current Contributors */

<div class="col-wrap-col-50">
{{whybox|title=WHY2025 Badge|content=
* [https://why2025.org/post/494 Blogpost 01]
* [https://why2025.org/post/697 Blogpost 02]
* [https://www.youtube.com/watch?v=-uMUSUYVGkU WHYCast Episode41]
* [https://tweakers.net/geek/237414/dit-is-de-why2025-badge-met-twee-esp32s-en-een-loramodule.html Tweakers article]
* [https://gitlab.com/why2025/team-badge Team:Badge GitLab repo] (files + documentation)
* [https://badge.why2025.org/ BadgeHub]
* WHY2025 Badge comes with two 18650 round battery cells, you don't need to buy cells before the event.
* ⚠️ [[Badge/Fire hazard]]
}}
</div>
<br>

Yes, we have a dedicated '''WHY2025 Badge Updates''' Signal group.

-> Feel free to share this new - '''WHY2025 Badge Updates''' - Signal group link with everyone at WHY2025.

https://signal.group/#CjQKINdiQ_2mg4ZIZ9AbjD5UHq8gnIgRojSTnOb6lbx-Tvh_EhDHBzcPicIer3NabcN0fuR9

yes, we're expecting this to become a big one :)

Thank you.

== We could use your help. ==

We need your support for printing the 3mm Full-frame Spacer.

If you want to help out then join the Signal group.

[https://signal.group/#CjQKIBzawhrMtrLuA-5d-J9omT2VW5gqnvtaXRbojytjGzoeEhAzItv1WoFWVkqlxx3GTaZc 3D printed spacer - Signal group]

Do you have a 3D printer and want to help print badge cases or spacers? Great.

=== 3mm Full-frame Spacers ===

We still need many more of these 3mm Full-frame spacers, any contributions are much appreciated.

Get the STL from [https://gitlab.com/why2025/team-badge/Hardware/-/blob/main/Spacer/3d_print/Full_Spacer_with_LoRa_Antenna_WHY2025.stl?ref_type=heads our Gitlab].

A few notes on printing:
* Most prints will be in PLA, so use that if possible.
* Avoid stack prints or anything that might create uneven surfaces on the prints.
* Color doesn't matter - use whatever you'd like.

* There are two options for the spacer thickness endresult:
* Option 1. A spacer thickness of 3mm everywhere. This is great.
* Option 2. A spacer thickness of 3mm in the top part. That is the display area.
* and 2.9 mm in the lower part. That is the keyboard area.

* There will be some 3D printers available at camp, so printing will continue during the event, but the more units we can make before then, the better.

== 3mm Full-frame Spacer Status ==

=== Current Contributors ===
{| class="wikitable"
|+ Full-frame Spacer Contributors
|-
! Number
! Credits to
! Printer
! Layer
|-
| 783 || [[Village:Geraffel]] [[File:Geraffel 3D black.jpg|80px|thumb]] || YES, MANY ||
|-
| 320 || Sander {{UserLink|Jar0d}} || BambuLab H2D & X1C ||
|-
| 42 || {{UserLink|Jelmo2}} || ||
|-
| 60 || {{UserLink|Renssies}} || - Bambu Lab X1C 2x (1 @ home, 1 @ work)<br />- Bambu Lab A1 (@ Pixelbar, now @ Village) ||
|-
| 86 || {{UserLink|Edwinm}} || Prusa MK3 || 0.20mm
|-
| 174 || {{UserLink|krekr}} (Gregor) || Creality K1 Max || 0.2mm
|-
| 30 || Fabian || ||
|-
| 10 || Frankkie || ||
|-
| 28 || NinjaLikesCheeze || ||
|-
| 200 || Klaas ({{UserLink|KlaasYK}}) & Harry & Ilja || Prusa Mk4 & Mk3S and a big thank you to DJO Groningen! ||
|-
| 3 || Wouter || ||
|-
| 46 || Saskia ({{UserLink|Sassy}}) || Prusa MK4S || 0.20mm
|-
| 100 || {{UserLink|rick}} || Prusa MK4S|| 0.20mm
|-
| 58 || Wouter ({{UserLink|Pa3weg}}) || Bambu LAN P1S || 0.20mm
|-
| >45 || Alex ({{UserLink|Tinyledmatrix}}) || Prusa MK2, Bambulab A1 Mini, Qidi X-Smart3 ||
|-
| 50 || Jan-Willem ({{UserLink|jwrm22}}) || Bambu Lab P1S || 0.20mm, suport material stacks
|-
| 105 || Michael ({{UserLink|MikeS}}) || Prusa MK3.9 and two dusted off MK2.5's ||
|-
| >60 || Henri ({{UserLink|Fashice}}) | already at badge tent| ||
|-
| 68 || {{UserLink|Dude77}} || Bambu Lab P1S || 0.20mm
|-
| 5 || {{UserLink|Luxim}} || Ender 3 v3 KE || 0.20mm
|-
|11 || {{UserLink|Galactum}} || Bambu Lab A1 || 0.20mm
|-
|20 || {{UserLink|MagicalDuck}} || Ender 3 || 0.24mm
|-
|40 || {{UserLink|Willow}} || Bambu Lab P1S || 0.20mm
|-
|30 || {{UserLink|Jap}} || Bambu Lab P1S || 0.20mm
|-
|>10 || {{UserLink|Habbie}} || Bambu Lab A1 || 0.20mm
|-
|71 || {{UserLink|Sndrsmnk}} || Bambu Lab P1S || 0.20mm
|-
|32 || {{UserLink|LordGaav}} || Voron V2.4 (V2.4523) || 0.20mm
|-
|4 || {{UserLink|Xylitol}} || CR-10S Pro || 0.20mm
|-
|6 || {{UserLink|Foorschtbar}} || Prusa XL || 0.20mm
|-
|11 || {{UserLink|Bx}} || Bambu Lab X1C || 0.20mm
|-
|>20 || {{UserLink|Iikkak}} || Ender 3 S1 pro || 0.20mm
|-
|9 || {{UserLink|q3k}} || MK3S+ || 0.20mm
|-
|10> || {{userLink|Jayblue}} || Flashforge Adventurer 5M || 0.20mm
|-
|2 || {{userLink|Miizix}} || Ender 3 || 0.20mm
|-
|24 || {{userLink|ScoutHack42}} || Bambu Lab A1 || 0.20mm
|-
|6 || {{userLink|FrancisD}} || GEEETECH A20 || 0.20mm
|-
| ??? || You? || ||
|}

Current total: '''>2579''' units printed / 3500 needed (73.7%)

Add your amount and name to this list. Thank you.

== Badge Case Info ==

Currently cases are designed around the prototype PCBs. The final boards might be slightly different, so best advise is currently to wait until (after) the camp with printing one - the badges will be usable without a case. Instead, maybe help with printing the 3mm full-frame spaces (see above).

• Designing your own case? Use the existing screw holes on the badge.
• Bring M2 screws, up to 15 mm in length depending on your case design.
• Badges function fully without a case.
• Note: Cases take much longer to print than spacers.

Case Examples by the community:
https://www.printables.com/model/1372316-why2025-badge-case

== Badge Assembly at BadgeTent ==

We aim to conduct the full-scale assembly during the whole day of Friday, which will involve a maximum of 30 volunteers working in the 15*15 meters BadgeTent.

Assembly involves screwing everything together.

Assembling your first '''WHY2025''' badge might feel overwhelming, that’s okay.

Take your time, explore the parts, and build confidence.

With repetition:
* 1st time = You're learning. -> Instructions on how to handle the components will be provided.
* 5th time = You gain confidence by knowing your tools and how to grab them the best way.
* 500th time = Congratulations, you have accomplished the assembly and will have a Foxconn recruiter on the line.

Parts to assemble:
* CarrierBoard
* Keyboard Dome Layer
* Keyboard Silicon Layer
* 3mm Spacers
* 4x M2 Screws
* Front Panel PCB

If you want to help out in the Badge Assembly on Friday during the day -> then join this Signal group.

[https://signal.group/#CjQKIIORCgY9yjX3a834iz-RQeOQu80fIZtg-i3G56EYqnaQEhBaRn9aHmtLggM6oH7dWXC5 Badge Assembly - Signal group].

== Lessons Learned during Badge Assembly ==

We encountered a small number of badges (three in total) where the Keyboard Dome Layer was slightly misaligned, leading to a few non-responsive keys. Thanks to our initial test-flashing process, we were able to detect these issues early and have since improved our application method for the Dome Layer.

To ensure quality, every badge will undergo a final quality control check, including a visual inspection of the epoxy and final firmware flashing, so that everyone receives a fully functional badge.

== Badge handout at BadgeTent ==

Starting: Friday 19:00 at BadgeTent

== LoRa Details ==

• The LoRa connector will not be pre-soldered but will be handed out as a compontent separately.

• You’ll also receive a screw-on LoRa antenna.

== Photo Sections ==

Pictures of 3D printed Full-frame Spacers:

[[File:Signal-2025-08-04-11-10-44-889.jpg|300px]]

[[File:Geraffel printed.jpg|300px]]

Pictures of WHY2025 Badge Cases:

[[File:Signal-2025-08-03-15-22-08-679.jpg|300px]]

[[File:Signal-2025-08-03-15-22-15-031.jpg|300px]]

[[File:20250804_140303.jpg|300px]]

Pictures of Final WHY2025 Badges with LoRa Antenna:

Badge

2025-08-07T21:44:58Z

Renssies: /* Current Contributors */

<div class="col-wrap-col-50">
{{whybox|title=WHY2025 Badge|content=
* [https://why2025.org/post/494 Blogpost 01]
* [https://why2025.org/post/697 Blogpost 02]
* [https://www.youtube.com/watch?v=-uMUSUYVGkU WHYCast Episode41]
* [https://tweakers.net/geek/237414/dit-is-de-why2025-badge-met-twee-esp32s-en-een-loramodule.html Tweakers article]
* [https://gitlab.com/why2025/team-badge Team:Badge GitLab repo] (files + documentation)
* [https://badge.why2025.org/ BadgeHub]
* WHY2025 Badge comes with two 18650 round battery cells, you don't need to buy cells before the event.
* ⚠️ [[Badge/Fire hazard]]
}}
</div>
<br>

Yes, we have a dedicated '''WHY2025 Badge Updates''' Signal group.

-> Feel free to share this new - '''WHY2025 Badge Updates''' - Signal group link with everyone at WHY2025.

https://signal.group/#CjQKINdiQ_2mg4ZIZ9AbjD5UHq8gnIgRojSTnOb6lbx-Tvh_EhDHBzcPicIer3NabcN0fuR9

yes, we're expecting this to become a big one :)

Thank you.

== We could use your help. ==

We need your support for printing the 3mm Full-frame Spacer.

If you want to help out then join the Signal group.

[https://signal.group/#CjQKIBzawhrMtrLuA-5d-J9omT2VW5gqnvtaXRbojytjGzoeEhAzItv1WoFWVkqlxx3GTaZc 3D printed spacer - Signal group]

Do you have a 3D printer and want to help print badge cases or spacers? Great.

=== 3mm Full-frame Spacers ===

We still need many more of these 3mm Full-frame spacers, any contributions are much appreciated.

Get the STL from [https://gitlab.com/why2025/team-badge/Hardware/-/blob/main/Spacer/3d_print/Full_Spacer_with_LoRa_Antenna_WHY2025.stl?ref_type=heads our Gitlab].

A few notes on printing:
* Most prints will be in PLA, so use that if possible.
* Avoid stack prints or anything that might create uneven surfaces on the prints.
* Color doesn't matter - use whatever you'd like.

* There are two options for the spacer thickness endresult:
* Option 1. A spacer thickness of 3mm everywhere. This is great.
* Option 2. A spacer thickness of 3mm in the top part. That is the display area.
* and 2.9 mm in the lower part. That is the keyboard area.

* There will be some 3D printers available at camp, so printing will continue during the event, but the more units we can make before then, the better.

== 3mm Full-frame Spacer Status ==

=== Current Contributors ===
{| class="wikitable"
|+ Full-frame Spacer Contributors
|-
! Number
! Credits to
! Printer
! Layer
|-
| 783 || [[Village:Geraffel]] [[File:Geraffel 3D black.jpg|80px|thumb]] || YES, MANY ||
|-
| 320 || Sander {{UserLink|Jar0d}} || BambuLab H2D & X1C ||
|-
| 42 || {{UserLink|Jelmo2}} || ||
|-
| 60 || {{UserLink|Renssies}} || Bambu Lab X1C 2x (1 at home, 1 at work), Bambu Lab A1 (at Pixelbar Village) ||
|-
| 86 || {{UserLink|Edwinm}} || Prusa MK3 || 0.20mm
|-
| 174 || {{UserLink|krekr}} (Gregor) || Creality K1 Max || 0.2mm
|-
| 30 || Fabian || ||
|-
| 10 || Frankkie || ||
|-
| 28 || NinjaLikesCheeze || ||
|-
| 200 || Klaas ({{UserLink|KlaasYK}}) & Harry & Ilja || Prusa Mk4 & Mk3S and a big thank you to DJO Groningen! ||
|-
| 3 || Wouter || ||
|-
| 46 || Saskia ({{UserLink|Sassy}}) || Prusa MK4S || 0.20mm
|-
| 100 || {{UserLink|rick}} || Prusa MK4S|| 0.20mm
|-
| 58 || Wouter ({{UserLink|Pa3weg}}) || Bambu LAN P1S || 0.20mm
|-
| >45 || Alex ({{UserLink|Tinyledmatrix}}) || Prusa MK2, Bambulab A1 Mini, Qidi X-Smart3 ||
|-
| 50 || Jan-Willem ({{UserLink|jwrm22}}) || Bambu Lab P1S || 0.20mm, suport material stacks
|-
| 105 || Michael ({{UserLink|MikeS}}) || Prusa MK3.9 and two dusted off MK2.5's ||
|-
| >60 || Henri ({{UserLink|Fashice}}) | already at badge tent| ||
|-
| 68 || {{UserLink|Dude77}} || Bambu Lab P1S || 0.20mm
|-
| 5 || {{UserLink|Luxim}} || Ender 3 v3 KE || 0.20mm
|-
|11 || {{UserLink|Galactum}} || Bambu Lab A1 || 0.20mm
|-
|20 || {{UserLink|MagicalDuck}} || Ender 3 || 0.24mm
|-
|40 || {{UserLink|Willow}} || Bambu Lab P1S || 0.20mm
|-
|30 || {{UserLink|Jap}} || Bambu Lab P1S || 0.20mm
|-
|>10 || {{UserLink|Habbie}} || Bambu Lab A1 || 0.20mm
|-
|71 || {{UserLink|Sndrsmnk}} || Bambu Lab P1S || 0.20mm
|-
|32 || {{UserLink|LordGaav}} || Voron V2.4 (V2.4523) || 0.20mm
|-
|4 || {{UserLink|Xylitol}} || CR-10S Pro || 0.20mm
|-
|6 || {{UserLink|Foorschtbar}} || Prusa XL || 0.20mm
|-
|11 || {{UserLink|Bx}} || Bambu Lab X1C || 0.20mm
|-
|>20 || {{UserLink|Iikkak}} || Ender 3 S1 pro || 0.20mm
|-
|9 || {{UserLink|q3k}} || MK3S+ || 0.20mm
|-
|10> || {{userLink|Jayblue}} || Flashforge Adventurer 5M || 0.20mm
|-
|2 || {{userLink|Miizix}} || Ender 3 || 0.20mm
|-
|24 || {{userLink|ScoutHack42}} || Bambu Lab A1 || 0.20mm
|-
|6 || {{userLink|FrancisD}} || GEEETECH A20 || 0.20mm
|-
| ??? || You? || ||
|}

Current total: '''>2579''' units printed / 3500 needed (73.7%)

Add your amount and name to this list. Thank you.

== Badge Case Info ==

Currently cases are designed around the prototype PCBs. The final boards might be slightly different, so best advise is currently to wait until (after) the camp with printing one - the badges will be usable without a case. Instead, maybe help with printing the 3mm full-frame spaces (see above).

• Designing your own case? Use the existing screw holes on the badge.
• Bring M2 screws, up to 15 mm in length depending on your case design.
• Badges function fully without a case.
• Note: Cases take much longer to print than spacers.

Case Examples by the community:
https://www.printables.com/model/1372316-why2025-badge-case

== Badge Assembly at BadgeTent ==

We aim to conduct the full-scale assembly during the whole day of Friday, which will involve a maximum of 30 volunteers working in the 15*15 meters BadgeTent.

Assembly involves screwing everything together.

Assembling your first '''WHY2025''' badge might feel overwhelming, that’s okay.

Take your time, explore the parts, and build confidence.

With repetition:
* 1st time = You're learning. -> Instructions on how to handle the components will be provided.
* 5th time = You gain confidence by knowing your tools and how to grab them the best way.
* 500th time = Congratulations, you have accomplished the assembly and will have a Foxconn recruiter on the line.

Parts to assemble:
* CarrierBoard
* Keyboard Dome Layer
* Keyboard Silicon Layer
* 3mm Spacers
* 4x M2 Screws
* Front Panel PCB

If you want to help out in the Badge Assembly on Friday during the day -> then join this Signal group.

[https://signal.group/#CjQKIIORCgY9yjX3a834iz-RQeOQu80fIZtg-i3G56EYqnaQEhBaRn9aHmtLggM6oH7dWXC5 Badge Assembly - Signal group].

== Lessons Learned during Badge Assembly ==

We encountered a small number of badges (three in total) where the Keyboard Dome Layer was slightly misaligned, leading to a few non-responsive keys. Thanks to our initial test-flashing process, we were able to detect these issues early and have since improved our application method for the Dome Layer.

To ensure quality, every badge will undergo a final quality control check, including a visual inspection of the epoxy and final firmware flashing, so that everyone receives a fully functional badge.

== Badge handout at BadgeTent ==

Starting: Friday 19:00 at BadgeTent

== LoRa Details ==

• The LoRa connector will not be pre-soldered but will be handed out as a compontent separately.

• You’ll also receive a screw-on LoRa antenna.

== Photo Sections ==

Pictures of 3D printed Full-frame Spacers:

[[File:Signal-2025-08-04-11-10-44-889.jpg|300px]]

[[File:Geraffel printed.jpg|300px]]

Pictures of WHY2025 Badge Cases:

[[File:Signal-2025-08-03-15-22-08-679.jpg|300px]]

[[File:Signal-2025-08-03-15-22-15-031.jpg|300px]]

[[File:20250804_140303.jpg|300px]]

Pictures of Final WHY2025 Badges with LoRa Antenna:

2025-04-23T11:42:00Z

Renssies: create user page

{{UserInfo
|NickName={{PAGENAME}}
|Languages=EN
|HackerSpace=
}}